Ufp/Dexter Disc Brake Kit 7K 8-Lug Zinc Rotor & Zinc Caliper (One Wheel)

UFP by Dexter 7000 lb 12" 8 on 6.5" Zinc+ Rotor with Zinc Caliper Kit

Kit Includes:

1 - 8-Lug Zinc+ Plated Rotor
1 - Zinc Caliper with chrome plated piston
1 - Set Brake Pads (w/painted brake pad plate and zinc plated anchor yoke)
1 - Brass Banjo Fitting
1 - Banjo Bolt (zinc plated)
1 - Bleeder Screw (zinc plated)
2 - Copper Washers
2 - Caliper Mounting Bolts (Zinc plated)
1 - Caliper Mounting Bracket (Optional Zinc Plated Mounting Adapter Bracket for Non UFP Axles)
2 - Seals (2.13" I.D. & 2.25" I.D.)
1 - Inner Bearing 25580
1 - Outer Bearing 14125A
1 - Stainless Steel Bearing Protector w/Bra 2.717" outer bore
8 - Cone Lug Nuts (Zinc Plated)

Slider pins, pad guides, and anti-rattle springs are all stainless steel.

Zinc+ = Zinc plated with top coat sealant that provides five times the corrosion protectant when applied over zinc plating.

Additional Features

No left or right hand calipers. (Fittings are shipped loose allowing the installer the ability to use caliper on either side. When mounting calipers, the bleeder screw postion should always be on top to allow proper bleeding.)

Ventilated rotors for temperature regulation to reduce brake pad deterioration, excessive wear and warping

Non-metallic, non-asbestos, organic pad materials to eliminate corrosion.

Disc brake caliper to be used with 6-lug 15" wheels and larger

Inlet/outlet port positions decrease amount of air in system through a large range of torsion arm trailing angles

Braking forces are transferred to the yoke/anchor bracket and not the caliper slider pins