Torsion Axle, 6,000 lb Capacity, 70" Frame Center, 89.25" Hub Face, 75.68" Outside Bracket, 35* Down Angle, Load Rite OEM Axle, Includes Disc Brakes, Old Part #6227.55B12
SKU: 6226.01
Used on Load Rite 96" Trailers Tandems after 2007
See attached schematic for specs
Please note: This is an oversized item and may need to be shipped via freight carrier, please call for a shipping quote
Special order item
SuperLube Lubrication
This Axle's Spindle is equipped with TDE’s SuperLube Lubrication System. The bearings can be periodically lubricated without removing the hubs from the axle. The advantage to this system is that new grease saturates the inner bearing and outer bearing while pushing out the old grease, unlike systems that just push new grease on top of old grease.
1. Remove the rubber plug from the grease (hub) cap.
2. Use a standard grease gun onto the grease fitting located at the end of the spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out of the hub around the spindle.
4. When the grease appears to be the new clean grease, remove the grease gun and wipe off any excess grease.
5. Replace the rubber plug in the cap.
***DUE TO OVERSIZE ITEM, ADDITIONAL UPS CHARGES APPLY***
PLEASE E-MAIL OR CALL FOR SHIPPING QUOTE.
from this merchant give
them a 4 or 5-Star rating.
