3,500# Galvanized Trailer Axle, 71.25" Hub Face, 76" Oal. 2" Square Straight Tube
SKU: 49549
2" Square Trailer Axle 3500 lbs
Hot dipped galvanized 3/16" square stock .
Spring Centers not drilled. See add-on spring seat 19070G and U-Bolt tie plate kit (longer lengths available-check measure of your existing u-bolts) Axle Type: 2" x 2" Square - Straight with brake flanges Load Rating: 3500 lbs. OAL:76" Track Length: 71.25" Spring Center: Per your specs Spindle Size: 1-3/8" x 1-1/16" (Standard with Super-Lube zerc fitting) Inner bearing #L68149 outer bearing #L44649
Tie Down Part # 49549: Trailer Running Gear, Axles & Hardware, Tow Zone Axles by Tie Down
SuperLube Lubrication
This Axle's Spindle is equipped with TDE’s SuperLube Lubrication System. The bearings can be periodically lubricated without removing the hubs from the axle. The advantage to this system is that new grease saturates the inner bearing and outer bearing while pushing out the old grease, unlike systems that just push new grease on top of old grease.
1. Remove the rubber plug from the grease (hub) cap.
2. Use a standard grease gun onto the grease fitting located at the end of the spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out of the hub around the spindle.
4. When the grease appears to be the new clean grease, remove the grease gun and wipe off any excess grease.
5. Replace the rubber plug in the cap.
All Tow Zone Axles are proudly made in the USA!
Hot dipped galvanized 3/16" square stock .
Tie Down Part # 49549: Trailer Running Gear, Axles & Hardware, Tow Zone Axles by Tie Down
SuperLube Lubrication
This Axle's Spindle is equipped with TDE’s SuperLube Lubrication System. The bearings can be periodically lubricated without removing the hubs from the axle. The advantage to this system is that new grease saturates the inner bearing and outer bearing while pushing out the old grease, unlike systems that just push new grease on top of old grease.
1. Remove the rubber plug from the grease (hub) cap.
2. Use a standard grease gun onto the grease fitting located at the end of the spindle, making sure the grease gun nozzle is engaged on the fitting tightly.
3. Pump grease into the fitting, while slowly turning the wheel. Grease will flow out of the hub around the spindle.
4. When the grease appears to be the new clean grease, remove the grease gun and wipe off any excess grease.
5. Replace the rubber plug in the cap.
All Tow Zone Axles are proudly made in the USA!
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
We're currently collecting product reviews for this item. In the meantime, here are some reviews from our past customers sharing their overall shopping experience.
4.7
Out of 5.0
Overall Rating
95%
of customers that buyfrom this merchant give
them a 4 or 5-Star rating.
April 30, 2024 by J.H. A. (United States)
“Great”
April 30, 2024 by steve S. (United States)
“so far so good quick and easy”
April 29, 2024 by Chris R. (United States)
“Great quick service”
